ServerNet Cluster 6780 Operations Guide (G06.24+, H06.03+)

SCF Error Messages
ServerNet Cluster 6780 Operations Guide—525606-002
6-11
SANMAN (SMN) Error Messages
SMN Error 00031
Cause. A switch failure occurred, or a switch is not present.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Correct the switch problem and reissue the command.
SMN Error 00032
Cause. A switch failure occurred, or a switch is not present.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Correct the switch problem and reissue the command.
SMN Error 00033
Cause. The X and Y switch types do not match.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Reissue the command first specifying the X switch and then again
specifying the Y switch.
SMN Error 00034
Cause. A sensitive command was executed noninteractively (that is, with a command
file).
Effect. The command is not executed. SCF waits for the next command.
Recovery. Reissue the command from an interactive SCF session.
SMN 00031 The model of neither the X or Y switch can be
determined.
SMN 00032 The type of the specified switch can not be
determined.
SMN 00033 The X and Y switch types are not the same.
SMN E00034 This command can only be executed interactively.