ServerNet Cluster 6780 Operations Guide (G06.24+, H06.03+)

Monitoring a ServerNet Cluster
ServerNet Cluster 6780 Operations Guide—525606-002
1-15
Using OSM to Monitor Expand-Over-ServerNet
Lines
Using OSM to Monitor Expand-Over-ServerNet Lines
You can use two methods to monitor Expand-over ServerNet lines:
•
Check the attributes of the remote node in the OSM Service Connection.
•
Perform the Add Node to ServerNet Cluster action on the local node.
Using the OSM Service Connection
1. Expand the ServerNet Cluster resource.
2. For information about the line configured from the local node to a specific remote
node, click the Remote Node resource.
3. In the details pane, click the Attributes tab.
4. Check the Line LDEV State attribute in the Expand-Over-ServerNet Configuration.
See Figure 1-19.
Using the Add Node to ServerNet Cluster Action
If you perform the Add Node to ServerNet Cluster action on a local node that has
already been added to the cluster, you can see the currently configured Expand-Over-
ServerNet lines.
To run the Add Node to ServerNet Cluster guided procedure:
1. Right-click the local node resource and select Actions.
2. In the Actions list, select Add Node to ServerNet Cluster.
Figure 1-19. Checking the Expand-Over-ServerNet Lines
VST1007.vsd