ServerNet Cluster 6780 Operations Guide (G06.24+, H06.03+)

Troubleshooting and Replacement Procedures
ServerNet Cluster 6780 Operations Guide—525606-002
3-29
Logic Board Display on the 6780 Switch
•
Check settings that are inconsistent with the position of the switch in the layered
topology. For example, switch X22 on the X fabric, zone 2, layer 2 should have a
numeric selector setting of 9622. See Table 3-5, 6780 Switch Identifiers for a
complete listing of numeric selector settings and what they represent.
For more information about the numeric selector, see the ServerNet Cluster 6780
Planning and Installation Guide.
Note. If your cluster uses the long-distance option, check that the numeric selectors
are set to the special settings listed in Appendix E, Numeric Selector Settings for the
Long-Distance Option. For more information about the long-distance option, see the
ServerNet Cluster 6780 Planning and Installation Guide.
Table 3-5. 6780 Switch Identifiers
Switch
Name
Numeric
Selector Fabric Zone Layer Group.Module
X11 9611 X 1 1 1010.1
X12 9612 X 1 2 1010.2
X13 9613 X 1 3 1010.3
X14 9614 X 1 4 1010.4
X21 9621 X 2 1 1020.1
X22 9622 X 2 2 1020.2
X23 9623 X 2 3 1020.3
X24 9624 X 2 4 1020.4
X31 9631 X 3 1 1030.1
X32 9632 X 3 2 1030.2
X33 9633 X 3 3 1030.3
X34 9634 X 3 4 1030.4
Y11 9711 Y 1 1 1011.1
Y12 9712 Y 1 2 1011.2
Y13 9713 Y 1 3 1011.3
Y14 9714 Y 1 4 1011.4
Y21 9721 Y 2 1 1021.1
Y22 9722 Y 2 2 1021.2
Y23 9723 Y 2 3 1021.3
Y24 9724 Y 2 4 1021.4
Y31 9731 Y 3 1 1031.1
Y32 9732 Y 3 2 1031.2
Y33 9733 Y 3 3 1031.3
Y34 9734 Y 3 4 1031.4