ServerNet Cluster 6780 Operations Guide (G06.24+, H06.03+)

SCF Commands for SNETMON and the ServerNet
Cluster Subsystem
ServerNet Cluster 6780 Operations Guide—525606-002
4-8
Example
The INFO SUBSYS command returns these fields:
Start state
shows the current value of the STARTSTATE attribute for the ServerNet cluster
subsystem. Possible values are:
Command state
shows the state for the ServerNet cluster subsystem that was last set by a START
SUBSYS or STOP SUBSYS operator command. This field is meaningful only if the
Command time field is later than the system load time, for example, if the operator
command was issued since the last system load. Possible values are:
Command time
shows the time that the state of the ServerNet cluster subsystem was last set by a
START SUBSYS or STOP SUBSYS command.
STARTED The ServerNet cluster subsystem is configured to move into the
STARTED state automatically and join the system to the
ServerNet cluster after a system load.
STOPPED The ServerNet cluster subsystem is configured to wait for a
START SUBSYS command after a system load before moving into
the STARTED state and joining the system to the ServerNet
cluster. This setting is the default.
STARTED The ServerNet cluster subsystem automatically joins the system to
the ServerNet cluster in the event of a restart (if the command time
is later than the system load time). If the ServerNet cluster is
already in a joined state, it remains joined to the system with no
disruption in connectivity.
STOPPED The ServerNet cluster subsystem automatically disconnects the
system form the cluster in the event of a restart (if the command
time is later than the system load time). This approach ensures
that the system is properly disconnected from the ServerNet
cluster.