ServerNet Cluster 6780 Operations Guide (G06.28+, H06.05+)

SCF Commands for SNETMON and the ServerNet
Cluster Subsystem
ServerNet Cluster 6780 Operations Guide—525606-003
4-13
STATUS SUBNET Command
STATUS SUBNET Command
The STATUS SUBNET command returns information about the state of the ServerNet
cluster subsystem connections to other systems within the ServerNet cluster. STATUS
is a nonsensitive command.
The STATUS SUBNET command syntax is:
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file.
DETAIL
displays detailed status information on all internal and external ServerNet paths
between processors for all nodes in the cluster.
LOCAL
displays detailed status information for the local ServerNet cluster subsystem only.
Use of this option negates the specification of the DETAIL option.
NODE
displays detailed status information only for the node (local or remote) having
ServerNet node number. Use of this option negates the specification of the
DETAIL option.
ACTIVE
displays a summary table of all ServerNet cluster subsystem connections for
currently active nodes only. If no options are specified for the command, ACTIVE is
assumed.
SUMMARY
displays a summary table of all ServerNet cluster subsystem connections for all
nodes at the beginning of the output, regardless of DETAIL, LOCAL, or NODE
options.
STATUS [ / OUT file-spec / ] SUBNET $ZZSCL
[, DETAIL ]
[, LOCAL ]
[, NODE ServerNet node number ]
[, ACTIVE ]
[, SUMMARY ]
[, PROBLEMS ]
[, RANGE min node number - max node number ]