ServerNet Cluster 6780 Operations Guide (G06.28+, H06.05+)

SCF Commands for SNETMON and the ServerNet
Cluster Subsystem
ServerNet Cluster 6780 Operations Guide—525606-003
4-24
STATUS SUBNET, DETAIL Command Example
25 Sft dwn unknown
reason
The path is in soft down state for an unknown reason.
26 Sft dwn max rvival
tries
The path is in hard down state because it failed and was
automatically revived more than 10 times in the last 1-hour
interval. Due to excessive failed revivals, automatic path
recovery is now disabled for this path.
27 Downed by operator
cmd
The path is down because an operator command brought
down the path at the source processor.
28 Src fab dwnd oper
cmd
The path is down because an operator command brought
down access to a ServerNet fabric at the source processor.
29 Src fab dwnd interrupt The path is down because the source processor received a
hardware interrupt indicating that access to a ServerNet
fabric is down.
30 Src fab dwnd unkn
cause
The path is down because the source processor lost access
to a ServerNet fabric for an unknown reason.
31 Dst fab dwned oper
cmd
The path is down because an operator command brought
down access to a ServerNet fabric at the destination
processor.
32 Dst fab dwnd interrupt The path is down because the destination processor received
a hardware interrupt indicating that access to a ServerNet
fabric is down.
33 Dst fab dwnd unkn
cause
The path is down because the destination processor lost
access to a ServerNet fabric for an unknown reason.
34 Path up other path
died
The source processor upgraded the path from soft or
operator down to good state because the path along the
other fabric failed.
35 Path up operator
command
The path is up because an operator command brought up the
path at the source processor.
36 Path up probe
success
The path was upgraded from soft down to good state after the
source processor sucessfully tested the path with automatic
path recovery probe messages.
37 Path up CPU brought
up
The path is up because the source processor learned that the
destination processor was up and available for direct
ServerNet connectivity.
38 Path up unknown
cause
The path is up for an unknown reason.
Table 4-3. Path State Values Returned by the STATUS SUBNET, DETAIL
Command (page3of3)
No. Path State Value Meaning