ServerNet Cluster 6780 Operations Guide (G06.28+, H06.05+)

SCF Commands for the External ServerNet SAN

Manager Subsystem

ServerNet Cluster 6780 Operations Guide—525606-003

5-2

SANMAN SCF Objects

These SCF objects are supported for SANMAN:

Sensitive and Nonsensitive Commands

Sensitive SCF commands can have detrimental effects if improperly used. A sensitive

command can be issued only by a user with the super ID, the owner of the subsystem,

or a member of the group of the subsystem owner. When used in conjunction with the

security features of the system services, SCF provides effective access control for

sensitive commands.

Commands that request information or status but do not affect operation are called

nonsensitive commands and are available to all users.

CONN Use this object to gather information about external fabric connec-

tions to a cluster switch.

PROCESS Use this object to issue commands for the external ServerNet SAN

manager process.

SUBSYS Use this object to control and display attributes that specify distances

between zones . These attributes are relevant only in three-zone

cluster topologies in which some zones are separated by distances

greater than 5 kilometers, while other zones are separated by dis-

tances of 5 kilometers or less.

SWITCH Use this object to issue commands for a cluster switch.

Note. A ServerNet cluster can contain one of two types of cluster switches. The latest cluster

switch is the HP NonStop ServerNet Switch (model 6780), used in the layered topology.

Examples in this section are based on the 6780 switch.