ServerNet Cluster 6780 Operations Guide (G06.28+, H06.05+)

SCF Commands for the External ServerNet SAN
Manager Subsystem
ServerNet Cluster 6780 Operations Guide—525606-003
5-9
Considerations
ONLINE
specifies that the current memory image be collected. This is the default value.
FORCED
specifies that the current memory image be collected even if an image saved by
firmware (as a result of a runtime error) has not been collected.
Considerations
•
The DUMP SWITCH command is a sensitive command and can be used only by a
super-group user (255, n) ID.
•
The DUMP SWITCH command is not valid for a 6770 switch.
•
Wild cards are not supported for the DUMP SWITCH command.
•
The specified dump file must be located on the local system.
DUMP SWITCH Command Examples
This example copies the current memory image from the switch on the Y fabric in zone
2, layer 3, to the file swdump1:
> DUMP SWITCH $ZZSMN, FABRIC Y, ZONE 2, LAYER 3, TO swdump1, ONLINE
This example copies the memory image saved by firmware from the local switch on the
X fabric to the file swdump2:
> DUMP SWITCH $ZZSMN, NEAREST X, TO swdump2, SAVED