ServerNet Cluster 6780 Operations Guide (G06.28+, H06.05+)

SCF Commands for the External ServerNet SAN
Manager Subsystem
ServerNet Cluster 6780 Operations Guide—525606-003
5-28
STATUS CONNECTION Command Example
STATUS CONNECTION Command Example
This example shows the STATUS CONNECTION $ZZSMN command:
-> scf status conn $zzsmn
|--------------------|---------------------------|---------------------------|
| Response Status | ok | ok |
| Rsp Status Detail | No Status Detail | No Status Detail |
|--------------------|---------------------------|---------------------------|
| Fabric Access | No Error | No Error |
|--------------------|---------------------------|---------------------------|
| MSEB | Port Status | Port Status |
|--------------------|---------------------------|---------------------------|
| Port | 6 | 6 |
| Link Speed | 125 MB/S | 125 MB/S |
| Optical Signal | present | present |
| Port Status | link alive | link alive |
| Link Level Rx | enabled | enabled |
| Link Level Tx | enabled | enabled |
| Packet Level Rx | enabled | enabled |
| Packet Level Tx | enabled | enabled |
| NNA Prog State | enabled | enabled |
| Node Number Mask | 0x000ff000 | 0x000ff000 |
| Node Routing ID | 0x00094000 | 0x00094000 |
|--------------------|---------------------------|---------------------------|
| ServerNet Switch | Port Status | Port Status |
|--------------------|---------------------------|---------------------------|
| CRU Slot | 7 | 7 |
| CRU Port | 1 | 1 |
| Transceiver Enabled| yes | yes |
| Transceiver Status | ok | ok |
| LED State | on | on |
| Link Speed | 125 MB/S | 125 MB/S |
| Optical Signal | present | present |
| Port Status | enabled | enabled |
| Node Number Mask | 0x000ff000 | 0x000ff000 |
| Node Routing ID | 0x00094000 | 0x00094000 |
| SvNet Node Number | 19 | 19 |
|--------------------|---------------------------|---------------------------|
In this example:
Response Status
is the general condition of the connection. For a list of possible values, see
Response Status Enumeration on page 5-53.
Rsp Status Detail
is the specific condition of the connection. For a list of possible values, see
Response Status Detail Enumeration on page 5-53.
Fabric Access
indicates the status of the external fabric connections. Possible values are:
•
No Error
•
MSEB MISSING
•
LINK DEAD
•
NO RESPONSE
•
PROCESSOR FABRIC DOWN
•
CRU TYPE NOT MSEB