ServerNet Cluster 6780 Operations Guide (G06.28+, H06.05+)

SCF Commands for the External ServerNet SAN
Manager Subsystem
ServerNet Cluster 6780 Operations Guide—525606-003
5-44
STATUS SWITCH, ROUTER Command Example
Switch Zone
is the zone where the switch is located within the layered topology. Possible values
are 1, 2, or 3.
Switch Layer
is the layer the switch occupies within the switch zone. Possible values are 1, 2, 3,
or 4.
Router Instance
is the router instance number. Possible values are in the range 1 through 5.
Router Port (nn)
lists detailed information for each router port (00 through 11) on the specified
router. Details appear in five columns:
Type
is the type of router port connection. Possible values are:
Speed
is the link speed (in MB/Sec) of the port. Possible values are 50 and 125.
Inrt
is the inport routing status. Possible values are:
Stat
is the status of the router port. For possible values, see Table 5-4, Router
Status Codes.
ext External port. The router port connects to an external transceiver port
on a switch PIC (for a zone, layer, or node connection).
nu Not used.
pkt Packetizer port.
ric Router interconnect. The router port connects to another router on
the logic board or to a router interconnect PIC. There is no external
connection.
ebxx Externally blocked, where xx is the router port number
IBxx Internally blocked, where xx is the router port number
idle Port is idle
nbxx Not blocked, where xx is the router port number