ServerNet Cluster 6780 Operations Guide (G06.28+, H06.05+)

SCF Commands for the External ServerNet SAN
Manager Subsystem
ServerNet Cluster 6780 Operations Guide—525606-003
5-48
STATUS SWITCH, SWITCHPORTS Command
Example
Stat
indicates the status of the transceiver. Possible values are ok and FAULT.
LED
indicates the state of the transceiver LED. Possible values are on, OF (off),
and BL (blinking).
OS
indicates the state of the optical signal for the transceiver. Possible values are
pr (present) and LOS (lost optical signal).
A value of BAD CRU STATUS across all four columns indicates that the CRU has
an error or is disabled. Other values that can appear in place of the four columns
are CRU ABSENT, WRONG CRU TYPE, and TRANSCVR ABSENT. Issue the
STATUS SWITCH command with the CRU option to get more detailed information.
Router
I, P
indicates the router instance (I) and router port (P). Router instance is in the
range 1 through 5. Router port is in the range 00 through 11.
Stat
is the status of the indicated router. For possible values, see Table 5-4, Router
Status Codes.