ServerNet Cluster 6780 Operations Guide (G06.28+, H06.05+)

SCF Error Messages
ServerNet Cluster 6780 Operations Guide—525606-003
6-9
SANMAN (SMN) Error Messages
SMN Error 00004
Cause. The command was rejected by the external ServerNet SAN manager process
($ZZSMN) because the information requested by the command is for an earlier product
version.
Effect. The command is not executed. SCF waits for the next command.
Recovery. You cannot request information from a system running an incompatible
version of SCF. Contact your service provider to resolve the version mismatch. (See If
You Have to Call Your Service Provider on page 6-20.)
SMN Error 00005
err-num
is the error number returned from an internal procedure.
Cause. An unexpected error was returned from an internal procedure that was called
by the external ServerNet SAN manager process ($ZZSMN). For information on file-
system errors, see the Guardian Procedure Errors and Messages Manual.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Consult the documentation on the returned file-system error to determine
what to do next. Check the event logs for more information pertaining to the problem.
SMN Error 00006
Cause. The processor switch was not performed. Possibly a nonexistent or halted
processor was specified as the primary processor.
Effect. The command is not executed. The process pair continues to execute in the
current processors. SCF waits for the next command.
Recovery. Verify the processors in use by the external ServerNet SAN manager
process pair.
SMN E00004 Not supported by the down revision SANMAN; SPI
version version-num
SMN E00005 Failure in service function. error: err-num.
SMN E00006 Processor switch failed.