ServerNet Cluster 6780 Operations Guide (G06.28+, H06.05+)

SCF Error Messages
ServerNet Cluster 6780 Operations Guide—525606-003
6-11
SANMAN (SMN) Error Messages
Effect. The command is not executed. SCF waits for the next command.
Recovery. Verify the database record using the SCF INFO SUBSYS command. Also,
check the EMS log for an occurrence of SMN event 4224. If necessary, reload the
system using a saved version of the system configuration database. If the problem
persists, contact your service provider. (See If You Have to Call Your Service Provider
on page 6-20.)
SMN Error 00030
Cause. Unknown:
Effect. Unknown; SCF waits for the next command.
Cause. Contact your service provider and retain a log of a VERSION PROCESS
$ZZSMN, DETAIL command.
SMN Error 00031
Cause. A switch failure occurred, or a switch is not present.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Correct the switch problem and reissue the command.
SMN Error 00032
Cause. A switch failure occurred, or a switch is not present.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Correct the switch problem and reissue the command.
SMN Error 00033
Cause. The X and Y switch types do not match.
Effect. The command is not executed. SCF waits for the next command.
SMN E00030 SANMAN SCF PM internal error at line line-num
SMN 00031 The model of neither the X or Y switch can be
determined.
SMN 00032 The type of the specified switch can not be
determined.
SMN 00033 The X and Y switch types are not the same.