ServerNet Cluster 6780 Operations Guide (G06.28+, H06.05+)

SCF Error Messages
ServerNet Cluster 6780 Operations Guide—525606-003
6-14
SANMAN (SMN) Error Messages
SMN Error 00042
Cause. The command was issued with an incorrect switch specifier.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Correct and reissue the command. The FABRIC, ZONE, LAYER
specification can be used only for switches in a layered topology.
SMN Error 00043
Cause. The command specified a POSITION attribute, but the specified switch does
not support the POSITION attribute.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Correct and reissue the command.
SMN Error 00044
Cause. The command specified a PORT attribute, but the specified switch does not
support the PORT attribute.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Correct and reissue the command.
SMN Error 00045
Cause. The command specified a SWITCHPORTS attribute, but the specified switch
does not support the SWITCHPORTS attribute.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Correct and reissue the command.
SMN E00042 Switch incorrectly specified.
SMN E00043 POSITION attribute is not allowed for the
specified switch.
SMN E00044 PORT attribute is not allowed for the specified
switch.
SMN E00045 SWITCHPORTS attribute is not allowed for the
specified switch.