ServerNet Cluster 6780 Operations Guide (G06.28+, H06.05+)

SCF Error Messages
ServerNet Cluster 6780 Operations Guide—525606-003
6-15
SANMAN (SMN) Error Messages
SMN Error 00046
Cause. The command specified a TOPOLOGY attribute, but the specified switch
does not support the TOPOLOGY attribute.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Correct and reissue the command.
SMN Error 00047
Cause. Neither HARD nor SOFT was specified in the command.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Correct and reissue the command.
SMN Error 00048
Cause. The command specified an incorrect combination of STATUS switch attributes.
Refer to the help text for STATUS SWITCH.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Correct and reissue the command.
SMN Error 00049
Cause. The command specified a switch that does not support the DUMP command.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Correct and reissue the command. Refer to the help text for DUMP
SWITCH. 6770 switches do not support the DUMP SWITCH command.
SMN E00046 TOPOLOGY attribute is not allowed for the
specified switch.
SMN E00047 HARD or SOFT must be specified.
SMN E00048 Incorrect combination of STATUS SWITCH attributes.
SMN E00049 The specified switch does not support the DUMP
command.