ServerNet Cluster 6780 Operations Guide (G06.28+, H06.05+)

Monitoring a ServerNet Cluster
ServerNet Cluster 6780 Operations Guide—525606-003
1-21
Using SCF to Check the Version of the ServerNet
Cluster Subsystem
Using SCF to Check the Version of the ServerNet Cluster
Subsystem
You can use the SCF VERSION command to display version information about the
ServerNet cluster subsystem. Example 1-7 shows the information returned by the
VERSION, DETAIL command.
For more information, refer to the VERSION Command on page 4-29.
Using SCF to Monitor Expand-Over-ServerNet Line-Handler
Processes
You can use the SCF STATUS DEVICE command for the WAN subsystem to obtain
information about the state of a line-handler process. Example 1-8 shows a line-
handler process in the STARTED state.
Example 1-9 shows a line-handler process in the STOPPED state.
Using SCF to Monitor Expand-Over-ServerNet Lines and Paths
You can use SCF commands for the Expand subsystem to obtain detailed information
about Expand-over-ServerNet lines and paths.
Example 1-7. VERSION SUBSYS, DETAIL Command
> VERSION SUBSYS $ZZSCL, DETAIL
Detailed VERSION SUBSYS \SYS.$ZZSCL
SYSTEM \SYS
SCL - T0294G08 - (11AUG03) - (07JUL03) - (AAL)
GUARDIAN - T9050 - (Q06)
SCF KERNEL - T9082G02 - (30APR03) (29JAN02)
SCL PM - T0294G08 - (11AUG03) - (07JUL03) - (AAL)
Example 1-8. STATUS DEVICE Command Showing STARTED Line-Handler
Process
> STATUS DEVICE $ZZWAN.#SC001
WAN Manager STATUS DEVICE for DEVICE \BUZZ.$ZZWAN.#SC001
State : ........... STARTED
LDEV number ....... 97
PPIN................ 0 ,19 BPIN............. 1 ,15
Example 1-9. STATUS DEVICE Command Showing STOPPED Line-Handler
Process
> STATUS DEVICE $ZZWAN.#SC003
WAN Manager STATUS DEVICE for DEVICE \BUZZ.$ZZWAN.#SC003
State : ........... STOPPED