ServerNet Cluster 6780 Operations Guide (G06.28+, H06.05+)

Monitoring a ServerNet Cluster
ServerNet Cluster 6780 Operations Guide—525606-003
1-24
Using SCF to Monitor Expand-Over-ServerNet Lines
and Paths
Using the SCF INFO LINE, DETAIL Command
Use the INFO LINE, DETAIL command to check operational information for an
Expand-over-ServerNet line. Example 1-14 shows an SCF INFO LINE, DETAIL
command and output for an Expand-over-ServerNet line named $SC002.
Using the SCF INFO PATH, DETAIL Command
Use the INFO PATH, DETAIL command to display detailed information about the
current or default attribute values for the path. Example 1-15 shows this command.
Example 1-14. INFO LINE, DETAIL Command
> INFO LINE $SC002, DETAIL
EXPAND Detailed Info LINE $SC002 (LDEV 186)
L2Protocol Net^Nam TimeFactor ... 1 *SpeedK..... SNET
Framesize.... 132 -Rsize..... -Speed.....
*LinePriority.. 1 StartUp..... OFF Delay. 0:00:00.10
*Rxwindow...... 7 *Timerbind..0:01:00.00 *L2Timeout.. 0:00:01.00
*Txwindow..... 7 *Maxreconnects... 0 *AfterMaxRetries PASSIVE
*Timerreconnect 0:01:00.00 *Retryprobe.... 10 *Timerprobe... 0:00:30.00
*Associatedev... $ZZSCL *Associatesubdev *Timerinactivity 0:00:00.00
*ConnectType... ACTIVEANDPASSIVE
Example 1-15. INFO PATH, DETAIL Command
> INFO PATH $SC043, DETAIL
EXPAND Detailed Info PATH $SC043
*Compress.... OFF *Nextsys....... #43 *OSspace.... 32767
*OStimeout... 0:00:03:00 *L4Retries..... 3 OldTF....... 32767
*L4Timeout... 0:00:20:00 *L4SendWindow.. 254 TimeFactor.. inf
L4ExtPackets ON *L4CongCtrl.... OFF *Superpath OFF
Local Remote Negotiated Maximum
*PathBlockBytes 0 0 0 4095
*PathPacketBytes 4095 0 0 4095