ServerNet Cluster 6780 Operations Guide (G06.28+, H06.05+)

ServerNet Cluster 6780 Operations Guide—525606-003
4-1
4
SCF Commands for SNETMON and
the ServerNet Cluster Subsystem
This section describes the SCF commands that are supported specifically for
SNETMON and the ServerNet cluster (SCL) subsystem. For a complete description of
SNETMON, see Appendix A, ServerNet Cluster Software.
For information on starting SNETMON, see Starting the ServerNet Cluster Monitor
Process (SNETMON) on page 2-5. For information on adding SNETMON to the
configuration database, see the ServerNet Cluster 6780 Planning and Installation
Guide.
Table 4-1 lists SCF objects and commands for SNETMON and the ServerNet cluster
subsystem.
Note. Commands that are generally supported by SCF, such as the ASSUME, ENV, and
TRACE commands, are documented in the SCF Reference Manual for G-Series RVUs.
Kernel subsystem SCF commands such as ABORT, ADD, and START for managing generic
(system managed) processes (such as the ServerNet cluster monitor process, represented as
a PROCESS object) are documented in the SCF Reference Manual for the Kernel Subsystem.
Table 4-1. ServerNet Cluster SCF Objects and Commands
Command
PROCESS
Object
SUBNET
Object
SUBSYS
Object
Sensitive
Command? Page
ALTER X Yes 4-5
INFO X No 4-7
PRIMARY X Yes 4-9
START X Yes 4-11
STATUS X X No 4-13
STOP X Yes 4-27
VERSION X X X No 4-29