ServerNet Cluster 6780 Operations Guide (G06.29+, H06.06+, J06.03+)

SCF Commands for the External ServerNet SAN
Manager Subsystem
ServerNet Cluster 6780 Operations Guide—525606-004
5-18
INFO SWITCH Command Example
Switch Type
indicates the type of switch on the fabric. The 6780 switch is used in the layered
topology.
Switch Zone
is the zone within the layered topology where the switch is located. Possible values
are 1, 2, or 3.
Switch Layer
is the layer within the switch zone. Possible values are 1, 2, 3, or 4. The switch
layer is equivalent to the switch module number, and the two values should match.
Group Number
is the switch group number.
Module Number
is the switch module number. The switch module is equivalent to the switch layer,
and the two values should match.
Switch Locator
is a string of ASCII characters that is used to describe or help locate the cluster
switch. For 6780 switches, the maximum length is 64 characters. For 6770
switches, the maximum length is 32 characters.
Packetizer type
is the packetizer type of the switch as defined in Tnet Services. For a 6780 switch,
the packetizer type is ServerNet II.
Packetizer SvNet ID
is the packetizer ServerNet ID for this switch.
Router Instances
is a router instance number. Possible values are in the range 1 through 5.
Router ASIC type
is the type of Router ASIC. For a 6780 switch, the ASIC type is Router 2.
Switch Poll Intrvl
is the interval in which SANMAN polls the cluster switch for status. The polling
interval depends on the version of SANMAN that is running on your system and
the state of the link. If a problem occurs with the link, the switch is polled more
often until the link is repaired.