ServerNet Cluster 6780 Operations Guide (G06.29+, H06.06+, J06.03+)

SCF Commands for the External ServerNet SAN
Manager Subsystem
ServerNet Cluster 6780 Operations Guide—525606-004
5-30
STATUS CONNECTION Command Example
Port Status
indicates the status of the MSEB or switch port. Possible values for the MSEB are:
•
link alive
•
LINK DEAD
•
RESET
•
LA, DISABLED
•
UNINSTALLED
Possible values for the switch port are listed in Table 5-4, Router Status Codes.
Link Lvl Rx
indicates whether Link Receive is enabled. Possible values are enabled or
DISABLED.
Link Lvl Tx
indicates whether Link Transmit is enabled. Possible values are enabled or
DISABLED.
Pckt Level Rx
indicates whether Packet Receive is enabled. Possible values are enabled or
DISABLED.
Pckt Level Tx
indicates whether Packet Transmit is enabled. Possible values are enabled or
DISABLED.
NNA Prog State
indicates the programming state of the NNA PIC on the MSEB. Possible values are
enabled, DISABLED, RESET, ENABLED FOR IBC ONLY, and CONFIG ERR.
Node Number Mask
is a bit-mask indicating which bits of the node routing ID are valid.
Node Routing ID
is the node number routing ID. For the MSEB, the ID is configured on the NNA
PIC. For the cluster switch port, the ID is assigned by the external fabric.
CRU Slot
is the slot number of the switch PIC that contains the port for this node connection.
Valid switch PIC slot numbers for node connections are 6, 7, 8, and 9.