ServerNet Cluster 6780 Operations Guide (G06.29+, H06.06+, J06.03+)

SCF Commands for the External ServerNet SAN
Manager Subsystem
ServerNet Cluster 6780 Operations Guide—525606-004
5-45
STATUS SWITCH, ROUTER Command Example
CRU S,P
is the slot number (S) and port number (P) of the switch PIC to which the router
port is connected. For a router interconnect PIC, only the slot number appears
because it has no ports.
Port Neighbor Data
contains information about the neighbor port, if it is a connected external port. The
Port Neighbor Data section of the display appears multiple times if there are
multiple zones and layers in the cluster. The neighbor port information includes:
Router Port
is the neighbor router port number.
Firmware Revision
is the version of firmware loaded on the 6780 switch
Numeric Selector
is the numeric selector setting of the 6780 switch
Neighbor Check
is the type of neighbor check to be performed to enable the port. For possible
values, see Table 5-2, Neighbor Checks.
Expt|Recv CRU S,P
is the expected and received values for the CRU slot (S) and port (P) numbers
of the neighbor. The first column contains the expected values, and the
second column contains the actual values received.
Expt|Recv Conf Ver
is the expected and received version of the neighbor configuration. The first
column contains the expected configuration version, and the second column
contains the actual configuration version received.
Expt|Recv Conf Tag
is the expected and received configuration tag of the neighbor. The first
column contains the expected configuration tag, and the second column
contains the actual configuration tag.
Expt|Recv Conf Rev
is the expected and received configuration revision of the neighbor. The first
column contains the expected configuration revision, and the second column
contains the actual configuration revision received.