ServerNet Cluster 6780 Operations Guide (G06.29+, H06.06+, J06.03+)

SCF Error Messages
ServerNet Cluster 6780 Operations Guide—525606-004
6-12
SANMAN (SMN) Error Messages
Recovery. Reissue the command first specifying the X switch and then again
specifying the Y switch.
SMN Error 00034
Cause. A sensitive command was executed noninteractively (that is, with a command
file).
Effect. The command is not executed. SCF waits for the next command.
Recovery. Reissue the command from an interactive SCF session.
SMN Error 00035
Cause. The command specified no attribute or more than one attribute to modify.
Refer to the help text for ALTER SWITCH.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Correct and reissue the command.
SMN Error 00036
Cause. The command specified a CRU attribute, but the specified switch type does
not support the CRU attribute.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Correct and reissue the command.
SMN Error 00037
Cause. The command incorrectly specified the fabric.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Correct and reissue the command.
SMN E00034 This command can only be executed interactively.
SMN E00035 Incorrect ALTER SWITCH attributes
SMN E00036 CRU attribute is not allowed for the specified
switch
SMN E00037 Fabric is incorrectly specified.