ServerNet Cluster 6780 Operations Guide (G06.29+, H06.06+, J06.03+)

SCF Error Messages
ServerNet Cluster 6780 Operations Guide—525606-004
6-16
SANMAN (SMN) Error Messages
SMN Error 00050
Cause. The command specified an incorrect combination of DUMP SWITCH
attributes.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Correct and reissue the command. Refer to the help text for STATUS
SWITCH.
SMN Error 00051
Cause. The command specified FAULTLEDS, but the specified switch does not
support the FAULTLEDS option.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Correct and reissue the command.
SMN Error 00057
Cause. The command specified an attribute other than Z1Z2DIST, Z1Z3DIST, or
Z2Z3DIST.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Correct and reissue the command.
SMN Error 00058
Cause. The command specified an invalid value for the Z1Z2DIST, Z1Z3DIST, or
Z2Z3DIST attribute. The value must be in the range from 1 to 15000 (meters).
Effect. The command is not executed. SCF waits for the next command.
Recovery. Reissue the command, specifying a valid distance between zones.
SMN E0050 Incorrect combination of DUMP SWITCH attributes.
SMN E0051 FAULTLEDS attribute is not allowed for the
specified switch
SMN E0057 ALTER SUBSYS attribute is invalid
SMN E0058 The specified distance attribute is out of range