ServerNet Cluster 6780 Operations Guide (G06.29+, H06.06+, J06.03+)

Monitoring a ServerNet Cluster
ServerNet Cluster 6780 Operations Guide—525606-004
1-22
Using SCF to Monitor Expand-Over-ServerNet Lines
and Paths
For more information about using SCF commands for the Expand subsystem, refer to
the Expand Configuration and Management Manual.
Using the SCF STATUS LINE, DETAIL Command
Use the STATUS LINE, DETAIL command to check the status for the Expand-over-
ServerNet line. Example 1-10 shows an SCF STATUS LINE, DETAIL command and
output for an Expand-over-ServerNet line named $SC003.
Using the SCF STATUS PATH, DETAIL Command
Use the STATUS PATH, DETAIL command to display detailed information about the
path. Example 1-11 shows this command.
Using the SCF STATS LINE Command
Use the STATS LINE command to display statistical information about the Expand-
over-ServerNet line. Example 1-12 shows this command.
Example 1-10. STATUS LINE, DETAIL Command
> STATUS LINE $SC054, DETAIL
EXPAND Detailed Status LINE $SC054
PPID............... ( 2, 263) BPID................. ( 5, 265)
State.............. STARTED Path LDEV............ 123
Trace Status....... OFF Effective line priority 1
Detailed State..... CONNECTED Status READY
Detailed Info... None
Trace File Name.... none
Example 1-11. STATUS PATH, DETAIL Command
> STATUS PATH $SC054, DETAIL
EXPAND Detailed Status PATH $SC054
PPID........ ( 2, 263) BPID........... ( 5, 265)
State....... STARTED Number of Lines.. 1
Trace Status OFF Superpath........ OFF
Line LDEVs.. 123
Trace File Name....none