ServerNet Cluster 6780 Operations Guide (G06.29+, H06.06+, J06.03+)

Troubleshooting and Replacement Procedures

ServerNet Cluster 6780 Operations Guide—525606-004

3-30

Replacement Procedures

This subsection includes these replacement procedures:

To service or replace all other server components, refer to the CSSI Web.

(Start>Programs>HP CSSI Web>CSSI Web.)

Do not attempt to replace a component unless you have exhausted all other

troubleshooting techniques and are reasonably certain that replacement is the only

alternative.

Replacing an MSEB

You use the guided replacement procedure to replace an MSEB. To launch the

Replace SEB or MSEB guided procedure from OSM:

1. In the tree pane, navigate to the MSEB you need to replace and right-click it.

2. Select Actions. The Actions dialog box appears.

3. From the Actions list, select Replace.

4. Click Perform action.

Online help is available to assist you in performing the procedure. You can replace only

one MSEB at a time.

Replacing a PIC in an MSEB

PICs installed in an MSEB can be replaced, but the MSEB must first be removed from

the enclosure. To remove the MSEB safely, you must use the guided procedure. Start

the guided procedure as described in Replacing an MSEB.

Procedure Page

Replacing an MSEB

3-30

Replacing a PIC in an MSEB 3-30

Replacing a Fiber-Optic Cable Between an MSEB and a Switch-to-Node Port 3-31

Replacing a Fiber-Optic Cable Between Cluster Switches 3-31

Replacing a 6780 Switch 3-32

Replacing a Switch Logic Board (Slot 14) 3-33

Replacing a Node PIC (Slots 6 Through 9) 3-33

Replacing a Layer PIC (Slots 11, 12, and 13) 3-33

Replacing a Zone PIC (Slots 2 and 3) 3-34

Replacing a Router Interconnect PIC (Slots 4, 5, and 10) 3-34

Replacing a Maintenance PIC (Slot 1) 3-34

Replacing a 6780 Switch Fan (Slots 16 and 17) 3-34

Replacing a 6780 Switch Power Supply (Slots 15 and 18) 3-34