ServerNet Cluster 6780 Planning and Installation Guide (G06.24+, H06.03+)

Connecting the Fiber-Optic Cables

ServerNet Cluster 6780 Planning and Installation Guide—527301-004

6-11

Zone Cable Connections

Two-Zone ServerNet Cluster

Figure 6-4 illustrates the connections between zones 1 and 2. Only the X fabric and

layer 1 are shown, but the cabling for the Y fabric and layers 2 through 4 is the same.

For a detailed list of all possible connections between zones 1 and 2, refer to these

tables:

•

Table 6-2, X Fabric Connections Between Two Zones, on page 6-12

•

Table 6-3, Y Fabric Connections Between Two Zones, on page 6-13

Note. Connections between zones 1 and 3 or between zones 2 and 3 are not shown. Two-

zone ServerNet clusters between these zones only support two cables between zones and are

less fault tolerant than a ServerNet cluster between zones 1 and 2.

Figure 6-4. Cable Connections for a Two-Zone ServerNet Cluster

X11

X21

Slot 2 Slot 3

VST650.vsd