ServerNet Cluster 6780 Planning and Installation Guide (G06.24+, H06.03+)

Checking Operations
ServerNet Cluster 6780 Planning and Installation Guide—527301-004
8-6
Checking the Numeric Selector Setting
5. Check the numeric selector setting loaded on each switch as described in
Checking the Numeric Selector Setting on page 8-6.
Checking the Numeric Selector Setting
For each switch, the numeric selector should be set as shown in Table 8-1. To check
the numeric selector setting loaded on the logic board, you can use either SCF, the
OSM Service Connection, or the logic board liquid-crystal display (LCD).
Note. Optional long-distance connections require special numeric selector settings. For more
information, see Appendix G, Using the Long-Distance Option.
Table 8-1. Numeric Selector Setting
Switch Numeric Selector
X11 9611
Y11 9711
X12 9612
Y12 9712
X13 9613
Y13 9713
X14 9614
Y14 9714
X21 9621
Y21 9721
X22 9622
Y22 9722
X23 9623
Y23 9723
X24 9624
Y24 9724
X31 9631
Y31 9731
X32 9632
Y32 9732
X33 9633
Y33 9733
X34 9634
Y34 9734