ServerNet Cluster 6780 Planning and Installation Guide (G06.24+, H06.03+)

Firmware, Configuration, and FPGA Planning
Form
Moving Node Cables Form
System Name: \_____________________
Expand Node Number: ________________
To complete the form:
1. Use the OSM Service Connection to identify the system name and Expand node number
of the node to be moved.
2. Record the system name and Expand node number of the node whose fiber-optic cable is
moving. For example:
System Name: \ PROD1
Expand Node Number: 011
3. For both fabrics:
a. Record the current switch name, PIC slot, and port number.
b. Record the switch name, PIC slot, and port number where you plan to move the
cables from the node.
Table B-7. Switch Logic Board Downloadable Images
File Version on $System.SYSnn
Images Currently Downloaded On
The Logic Board
Using OSM Using SCF
Version Image A Image B
Firmware M2789_____________________
Configuration C2790______________________
FPGA LBC2819___________________
Before Moving Cables After Moving Cables
Fabric
Switch
Name
PIC
Slot Port
ServerNet
Node
Number
Switch
Name
PIC
Slot Port
ServerNet
Node
Number
X
Y