ServerNet Cluster 6780 Planning and Installation Guide (G06.24+, H06.03+)

Updating the 6780 Switch Logic Board Firmware,
Configuration, and FPGA Images
ServerNet Cluster 6780 Planning and Installation Guide—527301-004
F-5
Task 3: Download the 6780 Switch Logic Board
FPGA
Task 3: Download the 6780 Switch Logic Board FPGA
If the correct version of the logic board FPGA is currently running on the switch, skip
this step. From the OSM Service Connection, use the Update FPGA action, which
downloads the FPGA to the switch:
1. Log on to the OSM Service Connection.
2. From the tree pane:
a. Expand the ServerNet Cluster.
b. Expand the External ServerNet Fabric for the X or Y fabric.
c. Expand the Switch Group to display the Switch Module.
d. Expand the Switch Module to display the Switch Logic Board.
3. Right-click the Switch Logic Board, and select Actions to display the Actions
dialog box.
4. From the Available Actions drop-down list, select FPGA Update.
5. In the Confirm FPGA Update dialog box, click OK.
6. In the Parameter dialog box, click OK to use the default configuration file.
7. In the FPGA Update dialog box, the message The FPGA update requires a
hard reset to finish. Do you want to continue? appears. Click Yes.
8. Wait until the status is passed.