ServerNet Cluster 6780 Planning and Installation Guide (G06.28+, H06.05+)
Table Of Contents
- What’s New in This Guide
- About This Guide
- 1 ServerNet Cluster Overview
- 2 ServerNet Cluster Hardware Description
- 3 Planning for Installation and Migration
- Planning Checklist
- Software Installation Planning
- Hardware Installation and Migration Planning
- Task 1: Plan for the ServerNet Nodes
- Task 2: Plan for the System Consoles
- Task 3: Plan for the 6780 Switches
- Task 4: Plan for the Racks
- Task 5: Plan for the Power Requirements
- Task 6: Plan the Location of the Hardware
- Task 7: Plan for the Fiber-Optic Cables
- Task 8: Plan to Migrate the ServerNet Nodes From 6770 Switches
- Task 9: Plan the ServerNet Node Numbers
- Task 10: Plan the Expand-Over-ServerNet Lines
- Migration Examples
- 4 Preparing a System for Installation or Migration
- 5 Installing 6780 Switches
- 6 Connecting the Fiber-Optic Cables
- Summary of Tasks
- Handling the Fiber-Optic Cables
- Connecting the Layer Cables
- Connecting the Zone Cables
- Connecting the Cables Between a Node and a 6780 Switch
- Alerts
- Task 1: Double-Check the Required Software and Hardware
- Task 2: Label the Cables That Connect to the Node
- Task 3: Inspect the Cables
- Task 4: Connect a Cable to the Switch
- Task 5: Connect a Cable to the Node
- Task 6: Check the Link-Alive LEDs
- Task 7: Check Operations
- Task 8: Finish Connecting the Fiber-Optic Cables
- Routing the Fiber-Optic Cables
- 7 Configuring Expand-Over-ServerNet Lines
- Using Automatic Line-Handler Generation
- Using the OSM Service Connection
- Using SCF
- Rule 1: Configure the Primary and Backup Line-Handler Processes in Different Processor Enclosures
- Rule 2: For Nodes With 6 or More Processors, Avoid Configuring the Line-Handler Processes in Proc...
- Rule 3: For Nodes With More Than 10 Processors, Avoid Configuring the Line-Handler Processes in P...
- Expand-Over-ServerNet Line-Handler Process Example
- 8 Checking Operations
- Checking the Operation of the ServerNet Cluster
- Checking the Operation of Each Switch
- Checking the Power to Each Switch
- Checking the Switch Components
- Checking the Numeric Selector Setting
- Checking the Globally Unique ID (GUID)
- Checking for a Mixed Globally Unique ID (GUID)
- Checking the Fiber-Optic Cable Connections to the Switch Port
- Checking the Switch Configuration, Firmware, and FPGA Images
- Checking the Operation of Each Node
- Checking the Service Processor (SP) Firmware
- Checking That Automatic Line-Handler Generation Is Enabled
- Checking the ServerNet Node Numbers
- Checking MSGMON, SANMAN, and SNETMON
- Checking for Alarms on Each Node
- Checking the ServerNet Cluster Subsystem
- Checking That the ServerNet Node Numbers Are Consistent
- Checking Communications Between a Local Node and a Switch
- Checking Communications With a Remote Node
- Checking the Internal ServerNet X and Y Fabrics
- Checking the Operation of Expand Processes and Lines
- 9 Changing a ServerNet Cluster
- OSM Actions
- Removing a Node From a ServerNet Cluster
- Removing Switches From a ServerNet Cluster
- Adding a Node to a ServerNet Cluster
- Adding a Switch Layer to a ServerNet Cluster
- Adding a Switch Zone to a ServerNet Cluster
- Task 1: Prepare to Add the Switches
- Task 2: Connect the Cables Between Layers
- Task 3: Check Operations
- Task 4: Disconnect the Cables Between Zones
- Task 5: Connect the Cables Between Zones
- Task 6: Check Operations
- Task 7: Connect the Additional Nodes
- Task 8: Check Operations
- Task 9: Repeat Tasks 2 Through 8 for the Other Fabric
- Task 10: Reenable OSM Alarms
- Moving a Node
- Changing the Hardware in a Node Connected to a ServerNet Cluster
- 10 Troubleshooting
- Symptoms
- Recovery Operations
- Enabling Automatic Expand-Over-ServerNet Line-Handler Generation
- Reseating a Fiber-Optic Cable
- Correcting a Mixed Globally Unique ID (GUID)
- Restoring Connectivity to a Node
- Switching the SANMAN Primary and Backup Processes
- Switching the SNETMON Primary and Backup Processes
- Configuring the Expand-Over-ServerNet Line-Handler Processes and Lines
- Starting Required Processes and Subsystems
- Fallback Procedures
- 11 Starting and Stopping ServerNet Cluster Processes and Subsystems
- A Part Numbers
- B Blank Planning Forms
- C ESD Guidelines
- D Specifications
- E Configuring MSGMON, SANMAN, and SNETMON
- F Updating the 6780 Switch Logic Board Firmware, Configuration, and FPGA Images
- G Using the Long-Distance Option
- Safety and Compliance
- Glossary
- Index
Glossary
ServerNet Cluster 6780 Planning and Installation Guide—527301-005
Glossary-22
ServerNet
messages to the clients or requesters. A server process is a running instance of a
server program.
ServerNet. A communications protocol developed by HP. See also ServerNet I and
ServerNet II.
ServerNet I. A communications protocol that features 50 megabytes/second speed, 6-port
ServerNet routers, 8b/9b encoding, and a 64-byte maximum packet size. See also
ServerNet II.
ServerNet II. A communications protocol that features 125 (or 50) megabytes/second
speed, 12-port ServerNet routers, 8b/9b and 8b/10b (serializer ready) encoding, and a
512-byte maximum packet size. ServerNet II architecture is backward-compatible with
ServerNet I architecture. See also ServerNet I.
ServerNet adapter. A hardware component that connects a system to peripheral devices
using a ServerNet bus interface (SBI). A ServerNet adapter is similar in function to an
I/O controller logic board (LB) and backplane interconnect card (BIC) in NonStop
K-series servers.
ServerNet address. A virtual memory address that, when translated to a physical address,
indicates where the memory access needed by a ServerNet transaction begins. In
some cases, the translation can point to some entity other than memory, such as a
register. The ServerNet address is included in all ServerNet read request and write
request packets.
ServerNet addressable controller (SAC). An I/O controller that is uniquely addressable by
a ServerNet ID in the ServerNet fabrics. A SAC is typically implemented on some
portion of a processor multifunction (PMF) customer-replaceable unit (CRU), an I/O
multifunction (IOMF) CRU, or a ServerNet adapter.
ServerNet cluster. A network of servers connected together using the ServerNet protocol,
and sharing a common transport protocol for interprocessor communication across and
within a cluster. A ServerNet cluster offers fast end-to-end communication without
intermediate protocol stacks, achieving comparable speeds for internal and external
ServerNet communication. See also cluster.
ServerNet Cluster. The abbreviated product name for the collection of hardware and
software components that constitute a ServerNet cluster.
ServerNet cluster monitor process (SNETMON). A process pair named $ZZSCL that
manages the state of the ServerNet cluster subsystem. Each node (system) in a
ServerNet cluster must have one SNETMON process pair running. See also ServerNet
cluster subsystem.