ServerNet Cluster Manual

Planning for Installation
ServerNet Cluster Manual—520575-003
2-24
Minimum Software Requirements
Checking SPR Levels
Table 2-9 shows how to check the current SPR levels for ServerNet cluster software.
Table 2-9. Checking SPR Levels
Product Software Component To check the current SPR level . . .
T0502 SANMAN At a TACL prompt:
> VPROC $SYSTEM.SYSnn.SANMAN
or
In SCF:
-> VERSION PROCESS $ZZSMN, DETAIL
If no version is indicated, see Footnote 1.
T0294 SNETMON/MSGMON At a TACL prompt:
> VPROC $SYSTEM.SYSnn.SNETMON
or
In SCF:
-> VERSION PROCESS $ZZSCL, DETAIL
If no version is indicated, see Footnote 1.
T0569 ServerNet II Switch
firmware and configuration
files (on the server)
2
To check the firmware file from a TACL prompt:
> VPROC $SYSTEM.SYSnn.M6770
To check the configuration file from a TACL prompt:
> VPROC $SYSTEM.SYSnn.M6770CL
If no version is indicated, see Footnote 1.
T1089 Service Processor (SP)
firmware
Using the TSM Service Application:
1. In the tree pane of the Management window,
navigate to the SP and right-click.
2. In the pop-up menu that appears, click
Attributes.
3. Check the Service Processor Firmware Version
attribute value.
T9082 Subsystem Control Facility
(SCF)
At a TACL prompt:
> VPROC $SYSTEM.SYSTEM.SCF
T0682 OSM server software At a TACL prompt:
> VPROC $SYSTEM.SYSnn.cimom
> VPROC $SYSTEM.SYSnn.ralprvd
T0632
T0633
OSM client software Launch the OSM Low-Level Link or OSM Notification
Director application and from the Help menu, click
About HP OSM...
T7945 TSM server software At a TACL prompt:
> VPROC $SYSTEM.SYSnn.SRM
T8154 TSM client software Log on to the TSM Service Application and from the
Help menu, click About Compaq TSM.
1 Versions of this software earlier than G06.12 do not include the SPR level as part of their version information. See
Table 2-10
on page 2-25.