ServerNet Cluster Manual

Installing and Configuring a ServerNet Cluster
ServerNet Cluster Manual—520575-003
3-24
Task 11: Add the Remaining Nodes to the Cluster
3. Click the plus (+) sign next to the ServerNet Cluster resource so you can see each
node or subcomponent of the ServerNet cluster. The tree pane displays ServerNet
cluster resources.
4. Look for yellow or red icons over a resource:
•
A yellow icon indicates that a resource is not in a normal operational state or
contains subcomponents that are yellow or red. The resource might require
operational intervention.
•
A red icon indicates that a resource requires service.
5. In the tree pane, select a resource having a yellow or red icon, then check the
attributes in the detail pane. For more information about displaying status
information and attributes, refer to Section 5, Managing a ServerNet Cluster.
6. Check the Alarm Summary dialog box for alarms. See Section 7, Troubleshooting
and Replacement Procedures for information about using OSM or TSM alarms and
troubleshooting problems.
Task 11: Add the Remaining Nodes to the Cluster
To add additional nodes to the cluster, repeat Tasks 1 through 10, skipping the tasks
that you may have already completed for all nodes.