ServerNet Cluster Manual

Upgrading a ServerNet Cluster
ServerNet Cluster Manual—520575-003
4-17
Upgrading Software to Obtain G06.12 Functionality
Upgrading Software to Obtain G06.12
Functionality
This upgrade begins with a ServerNet cluster consisting of up to eight nodes running
the G06.09, G06.10 or G06.11 RVU. The upgrade:
•
Installs new versions of the software listed in Table 4-13 on all nodes
•
Upgrades the firmware and configuration in the cluster switches
•
Does not change the cluster topology
•
Does not require upgrading to the G06.12 RVU unless you want to upgrade for
defect repair or new functionality
Following the upgrade, you can change the topology (add cluster switches) to support
up to 16 nodes without upgrading the ServerNet II Switch firmware and configuration.
Table 4-13 summarizes this upgrade.
Note. HP recommends upgrading to the latest software whenever possible. See
Upgrading Software to Obtain G06.14 Functionality on page 4-34. For availability of the
release 3 (G06.14) SPRs on G06.09 and later G-series RVUs, check with your service
provider.