ServerNet Cluster Manual

Upgrading a ServerNet Cluster
ServerNet Cluster Manual—520575-003
4-21
Upgrading Software Without System Loads to
Obtain G06.12 Functionality
You can upgrade two ways:
•
Upgrading Software Without System Loads to Obtain G06.12 Functionality on
page 4-21
•
Upgrading Software With System Loads to Obtain G06.12 Functionality on
page 4-25
Upgrading Software Without System Loads to Obtain G06.12
Functionality
This procedure upgrades the TSM client on all system consoles and applies the
following SPRs to all nodes:
•
SANMAN
•
ServerNet II Switch firmware
•
SP firmware
•
SCF
•
TSM server
Then one of the nodes is used to download the T0569AAB firmware and configuration
to the cluster switches. Upgrading the nodes to G06.12 is optional.
1. On the system consoles for all nodes in the cluster, upgrade the TSM client
software to Compaq 2001B or a later version of the TSM client. For more
information, refer to the NonStop System Console Installer Guide.
2. On all nodes in the cluster:
a. Use DSM/SCM to apply the following SPRs (and their requisite SPRs). For
more information about the SPRs, refer to Table 4-6 on page 4-8.
•
T0502AAE
•
T0569AAA (see note)
•
T0569AAB (see note)
•
T1089ABB
•
T9082ACQ
•
T7945AAW
Caution. HP recommends that you have access to a spare cluster switch before starting any
upgrade procedure that includes a firmware or configuration change.
Note. This procedure does not include T0294AAE, which is optional. For information
about upgrading SNETMON/MSGMON, refer to the softdoc.