ServerNet Cluster Manual

Upgrading a ServerNet Cluster
ServerNet Cluster Manual—520575-003
4-34
Upgrading Software to Obtain G06.14 Functionality
Upgrading Software to Obtain G06.14
Functionality
This section contains the following procedures:
Procedure Use this procedure if . . .
Upgrading Software Without System Loads
to Obtain G06.14 Functionality on
page 4-35
You want to obtain G06.14 functionality, but
you do not need to create a tri-star topology.
Upgrading Software With System Loads to
Obtain G06.14 Functionality on page 4-42
You need to build a tri-star topology and your
cluster currently contains some G06.09
through G06.12 nodes. To use the tri-star
topology, all nodes in a cluster must be
running one of the following:
•
G06.13 with SPRs
•
G06.14 or a later G-series RVU
Caution. HP recommends that you have a spare cluster switch on site or have ready access
to a spare cluster switch before starting any upgrade procedure that includes a firmware or
configuration change.