ServerNet Cluster Manual

Upgrading a ServerNet Cluster
ServerNet Cluster Manual—520575-003
4-35
Upgrading Software Without System Loads to
Obtain G06.14 Functionality
Upgrading Software Without System Loads to Obtain G06.14
Functionality
This procedure allows you to take advantage of defect repair and enhancements such
as automatic fail-over for the split-star topology. However, if the cluster contains
G06.09 through G06.12 nodes, this procedure does not prepare the cluster for
upgrading to a tri-star topology. To prepare a cluster for upgrading to a tri-star topology,
refer to Upgrading Software With System Loads to Obtain G06.14 Functionality on
page 4-42.
This upgrade:
•
Begins with a ServerNet cluster consisting of up to 16 nodes (star or split-star
topologies) running any of the following RVUs:
•
G06.09
•
G06.10
•
G06.11
•
G06.12
•
G06.13
•
Upgrades the TSM client software on all system consoles
•
Installs new versions of the software listed in Table 4-6 on page 4-8
•
Uses one of the nodes (or two nodes for a split-star topology) to download the
T0569AAE or superseding firmware and configuration to the cluster switches
•
Does not change the cluster topology
Table 4-14 summarizes this upgrade.