ServerNet Cluster Manual

Upgrading a ServerNet Cluster
ServerNet Cluster Manual—520575-003
4-36
Upgrading Software Without System Loads to
Obtain G06.14 Functionality
Table 4-14. Upgrade Summary: Upgrading Software Without System Loads to
Obtain G06.14 Functionality
Before the Upgrade After the Upgrade
Max. Nodes Supported 8 (star topology) or
16 (split-star topology)
8 (star topology) or
16 (split-star topology)
Cluster Switches Per
Fabric
1 or 2 1 or 2
NonStop Kernel Operating
System Release
G06.09, G06.10,
G06.11, G06.12, or
G06.13
Same (with SPRs)
ServerNet II Switch
Firmware
T0569 (empty files),
T0569AAA, or
T0569AAB
T0569AAE (or superseding)
SANMAN Version T0502, T0502AAA
(G06.09), or T0502AAE
(G06.12)
T0502AAG (or superseding)
TSM Server Version T7945AAS (G06.09),
T7945AAT (G06.10),
T7945AAV (G06.11),
T7945AAW (G06.12), or
T7945AAX (G06.13)
T7945AAY (or superseding)
TSM Client Version 10.0 (G06.09),
2000A (G06.10),
2001A (G06.11)
2001B (G06.12)
2001C (G06.13)
2001D
(or a later client version)
SNETMON/MSGMON
Version
T0294 (G06.09 or
G06.10), T0294AAB
(G06.11), or T0294AAE
(G06.12 or G06.13)
Refer to Table 4-28
on
page 4-95.
Service Processor (SP)
Version
T1089AAX (G06.09),
T1089AAZ (G06.09,
G06.10, or G06.11), or
T1089ABB (G06.12 or
G06.13)
T1089ABC
(or superseding)
SCF T9082ACN or
T9082ACQ
T9082ACQ (for G06.09
through G06.13) or
T9082ACR
*T0502AAG might not be immediately supported on all RVUs. Before upgrading, check with your HP
representative to ensure that all of the SPRs you need are available.