ServerNet Cluster Manual

Upgrading a ServerNet Cluster
ServerNet Cluster Manual—520575-003
4-43
Upgrading Software With System Loads to Obtain
G06.14 Functionality
Table 4-15 summarizes this upgrade.
Table 4-15. Upgrade Summary: Upgrading Software With System Loads to
Obtain G06.14 Functionality
Before the Upgrade After the Upgrade
Max. Nodes Supported 8 (star topology) or
16 (split-star topology)
8 (star topology),
16 (split-star topology), or
24 (tri-star topology)
Cluster Switches Per Fabric 1 or 2 1, 2, or 3
NonStop Kernel Operating
System Release
G06.09, G06.10, G06.11,
G06.12, or G06.13
G06.13 (with SPRs) or
G06.14
*
ServerNet II Switch
Firmware
T0569 (empty files),
T0569AAA, or T0569AAB
T0569AAE (or superseding)
SANMAN Version T0502, T0502AAA
(G06.09), or T0502AAE
(G06.12)
T0502AAG (or superseding)
TSM Server Version T7945AAS (G06.09),
T7945AAT (G06.10),
T7945AAV (G06.11),
T7945AAW (G06.12), or
T7945AAX (G06.13)
T7945AAY (or superseding)
TSM Client Version 10.0 (G06.09),
2000A (G06.10),
2001A (G06.11),
2001B (G06.12), or
2001C (G06.13)
2001D (G06.14) or a later
client version
SNETMON/MSGMON
Version
T0294 (G06.09 or
G06.10), T0294AAB
(G06.11), or T0294AAE
(G06.12 or G06.13)
Refer to Table 4-28
on
page 4-95.
Service Processor (SP)
Version
T1089AAX (G06.09),
T1089AAZ (G06.09,
G06.10, or G06.11), or
T1089ABB (G06.12 or
G06.13)
T1089ABC (or superseding)
SCF T9082ACN or T9082ACQ
•
T9082ACQ (for G06.09
through G06.13)
•
T9082ACR (for G06.14 or
G06.15)
•
T9082ACT (for G06.16)
*
G06.13 or a later G-series RVU is required only if you need to construct a tri-star topology. The G06.14 SPRs
can be applied to other RVUs. For availability of the SPRs on G06.09 through G06.12, check with your HP
representative. See Upgrading Software Without System Loads to Obtain G06.14 Functionality
on page 4-35.