ServerNet Cluster Manual

ServerNet Cluster Manual—520575-003
xix
About This Manual
The following table describes the sections of this manual.
Part Section Title This section...
I1ServerNet Cluster
Description
Introduces the ServerNet Cluster product.
It describes hardware components for the
6770 ServerNet Cluster Switch and
software components and the concepts
that are essential to understanding the
operation of a ServerNet cluster.
II 2 Planning for Installation
Describes how to plan for installing
ServerNet cluster hardware and software.
3 Installing and
Configuring a ServerNet
Cluster
Describes how to install ServerNet
Cluster hardware and software.
4 Upgrading a ServerNet
Cluster
Describes how to upgrade a ServerNet
cluster to a split-star topology that
supports up to 16 nodes or a tri-star
topology that supports up to 24 nodes.
III 5 Managing a ServerNet
Cluster
Describes tasks for monitoring and
controlling a ServerNet cluster.
6 Adding or Removing a
Node
Describes how to change the size of an
already-installed ServerNet cluster
(without changing the topology).
7 Troubleshooting and
Replacement
Procedures
Describes how to use the TSM Service
Application, the Subsystem Control
Facility (SCF), and guided procedures to
troubleshoot and diagnose a ServerNet
cluster. This section also contains
replacement procedures for the main
hardware components of a ServerNet
cluster.
IV 8 SCF Commands for
SNETMON and the
ServerNet Cluster
Subsystem
Describes the SCF commands that are
supported specifically for SNETMON and
the ServerNet cluster (SCL) subsystem.
9 SCF Commands for the
External ServerNet
SAN Manager
Subsystem
Describes the SCF commands that are
supported specifically for the external
system area network manager
(SANMAN) process (SMN) subsystem.