ServerNet Cluster Manual

Upgrading a ServerNet Cluster
ServerNet Cluster Manual—520575-003
4-61
Steps for Merging Two Star Topologies to Create a
Split-Star Topology
Table 4-17. Planning for Nodes in the Split-Star Topology
Before the Upgrade After the Upgrade
Cluster
Switch
Port /
ServerNet
Node
Number System Name
Cluster
Switch
Port /
ServerNet
Node
Number System Name
X__/Y__ 0 / ___ \_____________ X1/Y1 0 / 1 \_____________
1 / ___ \_____________ 1 / 2 \_____________
2 / ___ \_____________ 2 / 3 \_____________
3 / ___ \_____________ 3 / 4 \_____________
4 / ___ \_____________ 4 / 5 \_____________
5 / ___ \_____________ 5 / 6 \_____________
6 / ___ \_____________ 6 / 7 \_____________
7 / ___ \_____________ 7 / 8 \_____________
X__/Y__ 0 / ___ \_____________ X2/Y2 0 / 9 \_____________
1 / ___ \_____________ 1 / 10 \_____________
2 / ___ \_____________ 2 / 11 \_____________
3 / ___ \_____________ 3 / 12 \_____________
4 / ___ \_____________ 4 / 13 \_____________
5 / ___ \_____________ 5 / 14 \_____________
6 / ___ \_____________ 6 / 15 \_____________
7 / ___ \_____________ 7 / 16 \_____________
Table 4-18. Planning for Cluster Switches in the Split-Star Topology
Example X Fabric Y Fabric
Fabric/Position X1 X____ Y____
GUID V0XE6Z _____________________ _____________________
Configuration Tag 0x10000 _____________________ _____________________
Firmware Rev. 2_0_21 _____________________ _____________________
Configuration Rev. 0_0 _____________________ _____________________
Fabric/Position X2 X____ Y____
GUID V0YJ4B _____________________ _____________________
Configuration Tag 0x10001 _____________________ _____________________
Firmware Rev. 2_0_21 _____________________ _____________________
Configuration Rev. 0_0 _____________________ _____________________