ServerNet Cluster Manual

Upgrading a ServerNet Cluster
ServerNet Cluster Manual—520575-003
4-74
Steps for Merging Three Star Topologies to Create a
Tr i-Star Top ology
3. Decide which nodes will belong to each cluster switch before and after the upgrade
to the tri-star topology. You can use Table 4-22 on page 4-75 to record this
information.
Table 4-21. Planning for Cluster Switches in the Tri-Star Topology
Example X Fabric Y Fabric
Fabric/Position X1 X____ Y____
GUID V0XE6Z _____________________ _____________________
Configuration Tag 0x10002 _____________________ _____________________
Firmware Rev. 3_0_81 _____________________ _____________________
Configuration Rev. 2_5 _____________________ _____________________
Fabric/Position X2 X____ Y____
GUID V0YF1Z _____________________ _____________________
Configuration Tag 0x10003 _____________________ _____________________
Firmware Rev. 3_0_81 _____________________ _____________________
Configuration Rev. 2_5 _____________________ _____________________
Fabric/Position X3 X____ Y____
GUID R1PE4Y _____________________ _____________________
Configuration Tag 0x10004 _____________________ _____________________
Firmware Rev. 3_0_81 _____________________ _____________________
Configuration Rev. 2_5 _____________________ _____________________