ServerNet Cluster Manual

Managing a ServerNet Cluster
ServerNet Cluster Manual—520575-003
5-14
Checking the Status of SNETMON
For more information about the SCF INFO PROCESS command, refer to the SCF
Reference Manual for the Kernel Subsystem.
You can also use the SCF LISTDEV command to display the SNETMON logical device
(LDEV) number, name, and device type. Example 5-2 shows an SCF LISTDEV
command and its output.
For more information about the SCF LISTDEV command, refer to the SCF Reference
Manual for G-Series Releases.
Checking the Status of SNETMON
You can use the TSM Service Application or SCF to check the status of SNETMON.
Using TSM to Check the SNETMON Status
1. Log on using the TSM Service Application.
2. Click the Cluster tab to view information about the cluster.
3. Select the ServerNet Cluster resource.
4. In the Details pane, click the Attributes tab.
5. Check the SNETMON Process State attribute.
Example 5-1. INFO PROCESS Command
> INFO PROCESS $ZZKRN.#ZZSCL
NONSTOP KERNEL - Info PROCESS \MINDEN.$ZZKRN.#ZZSCL
Symbolic Name *Name *Autorestart *Program
ZZSCL $ZZSCL 10 $SYSTEM.SYSTEM.SNETMON
Example 5-2. LISTDEV Command
> LISTDEV $ZZSCL
LDev Name PPID BPID Type Rsize Pri Program
66 $ZZSCL 5,284 6,271 (64,0) 132 199 \KENO.$SYSTEM.SYS01.SNETMON