ServerNet Cluster Manual

Managing a ServerNet Cluster
ServerNet Cluster Manual—520575-003
5-21
Monitoring Expand-Over-ServerNet Lines and Paths
Using TSM to Monitor Expand-Over-ServerNet Lines
1. Log on using the TSM Service Application.
2. Click the Cluster tab to view information about the cluster.
3. For information about the line configured from the local node to a specific remote
node, click the Remote Node resource.
4. In the Details pane, click the Attributes tab.
5. Check the Expand/ServerNet Line LDEV State attribute.
Using the Guided Procedure to Monitor Expand-Over-
ServerNet Lines
If you run the guided procedure for configuring a ServerNet node on a system that has
already been added to a ServerNet cluster, the procedure quickly cycles through its list
of software checks and displays the ServerNet Cluster Connection Status dialog box.
See Figure 5-19. This dialog box shows the currently configured Expand-over-
ServerNet lines.
To run the guided procedure, choose Start>Programs>Compaq TSM>Guided
Configuration Tools>Configure ServerNet Node. Online help is available to assist
you in interpreting the dialog boxes.
Figure 5-18. Checking the Expand-Over-ServerNet Lines Using TSM
VST045.vsd