ServerNet Cluster Manual

Troubleshooting and Replacement Procedures
ServerNet Cluster Manual—520575-003
7-34
MSEB and ServerNet II Switch LEDs
Figure 7-9. ServerNet II Switch LEDs
1 2 3
4
XY 01 765432101198
5
10 2 3 54 6 7
891110
6
6
6
6 6 6
6
6
7 7
77
ServerNet II Switch Front Panel LEDs
ServerNet II Switch PIC LEDs
LED Type Color Function
Power-On Green
1
No.
Lights to indicate the ServerNet II Switch is powered on.
Fault Amber2
Lights to indicate the ServerNet II Switch is not in a fully functional state.
Possibly a fault was detected on the switch, or it has not been successfully
intiialized and configured.
When the switch is powered on, the amber LED lights briefly to indicate
initialization and configuration are in progress. When the switch has been
successfully intiialized and configured, the amber LED is extinguished. If
the switch could not be configured, the amber LED remains lit.
Ports 8-11 Green
Lights to indicate the ServerNet port is receiving a valid link-alive indication
from a remote ServerNet switch.
Ports 0-7 Green
Lights to indicate the ServerNet port is receiving a valid link-alive indication
from a ServerNet node.
X and Y Green
3
Lights to indicate the external ServerNet fabric (X or Y) served by the
switch.
PIC Ports
0-7
Green
Lights to indicate the ServerNet port is receiving a valid link-alive indication
from a ServerNet node.
PIC Ports
8-11
Green
Lights to indicate the ServerNet port is receiving a valid link-alive indication
from a remote ServerNet switch.
7
4
5
6
VST131.vsd