ServerNet Cluster Manual

ServerNet Cluster Manual—520575-003
8-1
8
SCF Commands for SNETMON and
the ServerNet Cluster Subsystem
This section describes the SCF commands that are supported specifically for
SNETMON and the ServerNet cluster (SCL) subsystem.
Table 8-1 lists SCF objects and commands for SNETMON and the ServerNet cluster
subsystem.
To use all the features in Table 8-1, you must be running the G06.14 RVU, or you must
have installed the SNETMON/MSGMON T0294AAG SPR. To determine which
features were introduced with each RVU, see Table 8-2, SCF Features for SNETMON
and the SCL Subsystem by RVU.
Note. Commands that are generally supported by SCF, such as the ASSUME and ENV
commands, are documented in the SCF Reference Manual for G-Series RVUs.
Kernel subsystem SCF commands such as ADD, START and STOP for configuring generic
(system managed) processes (such as the ServerNet cluster monitor process, represented as
a PROCESS object) are documented in the SCF Reference Manual for the Kernel Subsystem.
Note. For SCF changes made at G06.21 to the SNETMON and SANMAN product modules
that might affect management of a cluster with one of the star topologies, see
Appendix I,
SCF Changes at G06.21.
Table 8-1. ServerNet Cluster SCF Objects and Commands
Command
PROCESS
Object
SUBNET
Object
SUBSYS
Object
Sensitive
Command? Page
ALTER Command
X Yes8-5
INFO Command X No8-6
PRIMARY Command X Yes8-7
START Command X Yes8-8
STATUS Command XX No8-9
STOP Command X Yes8-21
TRACE Command X Yes8-22
VERSION Command XXX No8-25