ServerNet Cluster Manual

SCF Commands for SNETMON and the ServerNet
Cluster Subsystem
ServerNet Cluster Manual—520575-003
8-2
ServerNet Cluster SCF Objects
ServerNet Cluster SCF Objects
The following SCF objects are supported for SNETMON and the ServerNet cluster
(SCL) subsystem:
Sensitive and Nonsensitive Commands
Sensitive SCF commands can have detrimental effects if improperly used. A sensitive
command can be issued only by a user who has the super ID, the owner of the
subsystem, or a member of the group of the subsystem owner. When used in
conjunction with the security features of the system services, SCF provides effective
access control for sensitive commands.
Commands that request information or status but that do not affect operation are called
nonsensitive commands and are available to all users.
Table 8-2. SCF Features for SNETMON and the SCL Subsystem by RVU
RVU
SNETMON/
MSGMON
SPR Introduced These New SCF Features
G06.09 T0294
•
ALTER, INFO, START, STATUS, STOP, and
VERSION commands for the SUBSYS object
•
PRIMARY, TRACE, and VERSION commands for the
PROCESS Object.
T0294AAA
•
SUBNET object for STATUS command.
G06.12 T0294AAE
•
STATUS SUBNET displays information for up to 16
nodes
G06.14 T0294AAG
•
ACTIVE, SUMMARY, and PROBLEMS options for the
STATUS SUBNET command.
•
STATUS SUBNET displays information for up to 24
nodes
PROCESS Use this object to issue commands for SNETMON
($ZZKRN.#ZZSCL).
SUBNET Use this object to gather information about connections within
the ServerNet cluster subsystem ($ZZSCL).
SUBSYS Use this object to issue commands for the ServerNet cluster
subsystem itself ($ZZSCL).