ServerNet Cluster Manual

SCF Commands for SNETMON and the ServerNet
Cluster Subsystem
ServerNet Cluster Manual—520575-003
8-12
STATUS SUBNET Command Example
The following paragraphs explain the fields returned by the STATUS SUBNET
summary table:
Node
is the ServerNet node number (1 through 24) of the local or remote system, where:
LCL
indicates that the node is local. This ServerNet node’s SNETMON is providing
the information in the display.
RMT
indicates that the node is remote. This is any ServerNet node other than the
local node.
SysName
is the system name of the ServerNet node.
Num
is the Expand node number of the ServerNet node.
SNETMON CPU States
provides an individual path state summary code for the connections between the
local node and a particular processor of a particular ServerNet node. The path
state codes are as follows:
Path State
Code Description
0 The paths are down because the processor is down.
1 The paths and processor are up without errors.
P The processor is up, but there are errors on both internal fabrics.
X The processor is up, but there is an error on the internal X fabric.
Y The processor is up, but there is an error on the internal Y fabric.
p The processor is up, but there are errors on both external fabrics.
x The processor is up, but there is an error on the external X fabric.
y The processor is up, but there is an error on the external Y fabric.
Note. If errors are present on both the internal and external paths, only an internal path
error is indicated. You can use the DETAIL, LOCAL, or NODE option to obtain more
detailed information.