ServerNet Cluster Manual

SCF Commands for SNETMON and the ServerNet
Cluster Subsystem
ServerNet Cluster Manual—520575-003
8-17
STATUS SUBNET, DETAIL Command Example
(Partial Display)
SRC
is the source processor (00 through 15) of ServerNet packets intended for
processors listed in the top row of the table.
The numeric values in the command output indicate the state of the paths between the
source and destination processors. Table 8-4 describes each of the 38 path state
values.
If Path State Problems Are Indicated
If the output of the STATUS SUBNET, DETAIL command indicates path-state
problems, see Methods for Repairing ServerNet Connectivity Problems on page 7-23.
You can also use the TSM Service Application to investigate path-related problems. If
an alarm appears on a component of the path, perform any associated repair actions.
For details, see Using TSM Alarms on page 7-12.
If these actions do not solve the path problem, contact your service provider.
Table 8-4. Path State Values Returned by the STATUS SUBNET, DETAIL
Command (page1of3)
No. Path State Value Meaning
1 Unknown state The state is unknown.
2 No data for path The node is not known by the local ServerNet cluster
subsystem.
3 No remote path data The state of the processors in the node is not known by the
local ServerNet cluster subsystem.
4 Source CPU down The source processor is down. Reload the processor if it is
installed in the source node.
5 Destination CPU
down
The destination processor is down. Reload the processor if it
is installed in the destination node
6 Src strtng SNet not
allc
The source processor is starting direct ServerNet connectivity
along the path but has not yet allocated the necessary
ServerNet resources in the kernel.
7 Src strtng SNet allc The source processor is starting direct ServerNet connectivity
along the path and has already allocated the necessary
ServerNet resources in the kernel.
8 Src brought down
conn
The source processor brought down direct ServerNet
connectivity along the path because it believes the
destination processor is down or the destination node is
unreachable via ServerNet.
9 Dst strtng SNet not
allc
The destination processor is starting direct ServerNet
connectivity along the path but has not yet allocated the
necessary ServerNet resources in the kernel.