ServerNet Cluster Manual

SCF Commands for the External ServerNet SAN
Manager Subsystem
ServerNet Cluster Manual—520575-002
9-10
INFO SWITCH Command Example
In this example:
Command Status
is the general condition of the connection. For a list of possible values, see
Command Status Enumeration on page 9-37.
Status Detail
is the specific condition of the connection. For a list of possible values, see Status
Detail Enumeration on page 9-37
Switch Locator
is an identifier string of 0 to 32 ASCII characters that can be used to describe or
help locate the cluster switch.
Eye Catcher
indicates the nature of the configuration. For cluster switch configuration, the value
is SN.
Manufacturer ID
is the HP code for the manufacturer of the ServerNet switch subcomponent of the
cluster switch.
Manufacturer Model
is the model of the ServerNet switch subcomponent of the cluster switch. Possible
values are: ServerNet I and ServerNet II. Only ServerNet II Switches
can be used in ServerNet clusters.
Hardware Revision
is the revision of the ServerNet switch motherboard.
Firmware Revision
is the version of firmware running on the cluster switch
Firmware VPROC
is the VPROC string for the version of firmware running on the cluster switch.
Globally Unique ID
is a unique 6-character value used to identify the cluster switch. The GUID is
stored in nonvolatile memory (SEEPROM) on the ServerNet II Switch
subcomponent at the time of manufacture. The GUID is not visible on the exterior
of the ServerNet II Switch.