ServerNet Cluster Manual

SCF Commands for the External ServerNet SAN
Manager Subsystem
ServerNet Cluster Manual—520575-002
9-21
STATUS CONNECTION Command Example
Link Lvl Prtcl Trn
indicates whether Link Transmit is enabled. Possible values are ENABLED or
DISABLED.
Pckt Lvl Prtcl Rcv
indicates whether Packet Receive is enabled. Possible values are ENABLED or
DISABLED.
Pckt Lvl Prtcl Trn
indicates whether Packet Transmit is enabled. Possible values are ENABLED or
DISABLED.
Lost Optical Signl
indicates whether a lost optical signal error occurred.
Status for Neighbor
indicates the status of the cluster switch port as reported to neighboring switches
on the same external fabric. This field does not apply to MSEB ports. Possible
values are:
Target Output Port
indicates whether the target output port is enabled. Possible values are ENABLED
and DISABLED.
Node Number Mask
is a bit-mask indicating which bits of the node routing ID are valid.
OK No Error
LINK DEAD Link is dead
WRONG FAB Wrong Fabric
INVLD NBR Neighbor Invalid
INVLD PORT Invalid Port
MIXED GUID Mixed Globally Unique ID
INVLD PRTNM Invalid Part Number
INVLD VERID Invalid Version ID
MIXED CNFTG Mixed Configuration Tag
INVLD CNFTG Invalid Configuration
UNINITALZED Uninitialized